USA Commercial Heat Treater Closes Their Doors
USA Commercial Heat Treater Closes Their Doors Earlier this week, Phoenix Metal Treating, located at W190 N11350 Carnegie Drive in Germantown, Wisconsin, officially closed down. This 40 year old family owned company operated several medium sized Beavermatic and Ipsen batch IQ furnaces and catered largely to the local automotive parts suppliers….
Japanese High-Tech Sector Orders SECO/WARWICK Vacuum Furnace
Japanese High-Tech Sector Orders SECO/WARWICK Vacuum Furnace (Editor’s Note; In this press release Maciej Korecki, Vice President of the SECO/WARWICK Group’s Vacuum Segment states; “This order will support the production of components for gas turbines”. Recently “The Monty Heat Treat News” published an article entitled, ” AI Data Centers Spiking…
Used Furnace And Equipment Listings
“The Monty” has one of the largest listings for used heat treating equipment in North America. Below you will find our two most recent additions and also a categorized listing by furnace type. If you don’t find what you are looking for let us know and we will find it for you. Have equipment to sell? We are here to find you a buyer, just drop a line to [email protected]
Ipsen Expands U.S. Service Network with New Texas-Based HUB
Ipsen Expands U.S. Service Network with New Texas-Based HUB Ipsen announces the launch of its seventh regional Service HUB, strategically located to support customers in East Texas, as well as parts of Oklahoma and Louisiana. Officially launched in April 2025, the new HUB provides regional customers with a single point of contact for routine…
Parts Discolored? Answer These Questions First – Written By Ipsen
Parts Discolored? Answer These Questions First – Written By Ipsen One of the most frequently asked questions by vacuum furnace operators is “Why are my parts discolored?” While many customers may believe they’ve thoroughly tested and inspected their equipment before reaching out to us, there are often areas that might be overlooked during…
Vacuum Furnace Manufacturer Sees Strong Aerospace Recovery
Vacuum Furnace Manufacturer Sees Strong Aerospace Recovery Nitrex’s G-M Enterprises division in Corona, California, USA continues to gain momentum with new vacuum furnace orders from both longstanding and new customers. Most recently, a long-time repeat customer—one of the top-tier suppliers in the aerospace industry—has placed an order for a…
Solar Atmospheres Launches Testing Facility
Solar Atmospheres Launches Testing Facility “Solar Atmospheres of Western PA has taken a proactive step toward enhancing operational reliability and workplace comfort by constructing a new temperature-controlled environment around their critical Haas machining centers and Marvel saws. This strategic investment was driven by the upcoming…
“Cieffe Thermal Systems” Italy
“Cieffe Thermal Systems” Italy A recent business trip to Italy and Slovenia by “Gord Montgomery” of “The Monty Heat Treat News” led to a series of articles about both captive and commercial heat treaters with a “healthy dose” of furnace manufacturers thrown into the mix. One of those visits was to furnace builder “CIEFFE” in Colle…
SEW-EURODRIVE Accepts Vacuum Furnace System for Increasing In-House Heat Treat Demands
SEW-EURODRIVE Accepts Vacuum Furnace System for Increasing In-House Heat Treat Demands Congratulations to the SEW-EURODRIVE heat treatment team for the completion of their fully automated in house vacuum furnace system integrated with their patented MOVITRANS® inductive energy power transfer system (pictured parallel with ECM’s transfer system…
Sun Steel Treating Opens Their Doors to “The Monty Heat Treat News”
Sun Steel Treating Opens Their Doors to “The Monty Heat Treat News” Last week we profiled a successful commercial heat treater in Indiana by the name of “ Dependable Metal Treating ” and pointed out that while the company was successful for a number of reasons, a substantial factor in the company’s success was that they have standardized on one…
Heat Treater Appoints New Plant Manager
Heat Treater Appoints New Plant Manager We mentioned a few weeks ago about how Paulo, one of the largest commercial heat treaters in North America as ranked by ” The Monty Heat Treat News ” https://themonty.com/project/50-largest-north-american-commercial-heat-treats-2021-2/ had appointed a new Plant Manager for their St. Louis, MO, USA facility….
UK Commercial Heat Treater Adds More Nitriding Capacity
UK Commercial Heat Treater Adds More Nitriding Capacity “Aalberts Surface Technologies & Nitrex: An Ongoing Partnership; NITREX METAL and AALBERTS SURFACE TECHNOLOGIES HEAT LTD. (formerly Hauck Heat Treatment Ltd.) have been doing business together since 1995. That’s why when AALBERTS ST, the second biggest commercial heat treater in the…
Watlow® Signs Agreement to Acquire Eurotherm® from Schneider Electric®
Watlow® Signs Agreement to Acquire Eurotherm® from Schneider Electric® This acquisition caught our attention as both companies are involved with the heat treating industry. What changes there will be remains to be seen. “Watlow®, a designer and manufacturer of complete industrial thermal systems, is pleased to announce that it has signed an…
Heat Treater Finds Success Through Standardizing-Dependable Metal Treating
Heat Treater Finds Success Through Standardizing-Dependable Metal Treating Every successful commercial heat treater in the world has achieved that success through a slightly different formula, concentrating on a particular process, having a process which the competition doesn’t have, offering better pricing and deliveries, being a “one stop”…
Heat Treat Industry “Names in the News”
Heat Treat Industry “Names in the News” In the US Mr. Tom Klauba has very recently been appointed Production Manager at commercial heat treat Hudapack Metal Treating Inc. in Elkhorn, Wisconsin. This location is part of the Thermal Process Holdings Group, one of the largest North American commercial heat treat treaters as ranked by “…