Nov 9, 2018
Manufactured by BTU this is an electrically heated mesh belt furnace capable of 1100C. Heated length is 120” with a 18” wide belt and 4” clearance over belt. Metallic muffle, 10 zones of temperature control. 24” long load/unload table at each end. Overall length 29’....
Oct 30, 2018
Compact belt furnace 321-7-90 6677 1000°C. Built by Solo of Switzerland this is a SOLO 321-7-90 model. This furnace was manufactured in 1990. Composition: Loading frame, heating part with frame, cooling part with frame, unloading frame, driving system, conveyor belt,...
Oct 30, 2018
Lobo Hornos built this mesh belt furnace line with all the engineering coming from Sunbeam. The line consists of a loader, high heat furnace, quench tank, wash, temper, and post wash. It has Honeywell, Shinha, and Siemens controls that are approximately 12 years old....
Oct 30, 2018
LAC Type. Work Zone: 12″ Wide Belt, 12″ High work area, 12′ heat, 12′ cool with 3 zones of temperature control. 1120C maximum temperature (2000F operating temperature). Power: 220V, 75KW, 212Amp, 60Hz , 3Ph. “Air Products” Gas Mixing Panel (N2, H2). Footprint: 9’W x...
Oct 30, 2018
The line consists of a loading table, cast link belt hardening furnace, oil quench, cross conveyor, post wash and two continuous tempering furnaces. High belt is 24” wide X 300” long with a capacity of 336 Kg/h. Nitrogen/Methanol atmosphere. Electrically heated 300...
Oct 30, 2018
Ipsen Model SG500, S/N52822. Shaker hearth style hardening furnace is capable of 500 pounds/hour, 1850F operating temperature, gas fired 800,000 BTU’s/hour with an 18” wide tray. Temper has an operating temperature of 800F and a heat input of 300,000 BTU’s. Controls...
Oct 30, 2018
Manufactured by Wellman in 1982. Model #AL-81-180 RH, S/N 180. Working dimensions of 60” Wide x 42’ Long x 14” High – 4800#/HR. Electric – 480/3/60 – 469 KW (over (4) Zones of Control). Operating temperature of 1650° F. Brick Lined Atmosphere Capable Roller Hearth...
Oct 30, 2018
Manufactured by Atmosphere Furnace Company this furnace has working dimensions of 6″ high x 54″ wide x 12′ long (heated section). Gas fired with radiant tubes. Operating temperature of 1800F. S/N 6948. Temperature Controls: Free standing enclosed panel. Honeywell...
Oct 30, 2018
Manufactured by Rogers Engineering 4,000 pounds/hour cast link belt furnace line consisting of a 1750F high heat furnace and 1700F temper furnace. Serial # CC-3977-0 (1997). High Heat Furnace: 48″W Omega Cast Link Belt, 4″ pitch, 3″ sides. Furnace has a 30’L heating...
Oct 30, 2018
Denton Thermal Systems (O’Brien & Gere) 2150˚F Rotary Hearth Furnace System. Includes high temperature furnace, Nitrogen-Methanol Panel and Quench Press. Working Zone: 6 ft Diameter Hearth, Door Opening is 14″W x 13″H Overall Size: 9ft-8in Diameter x...
