Item#I181 Pillar Induction Heat Treat System 50 kW, 50 kHz

Item#I181 Pillar Induction Heat Treat System 50 kW, 50 kHz

This is an automatic Lift and Rotate Machine with a single lift position and TWO heat stations allowing for heating in two different locations in one machine cycle. The two heat stations are controlled by a transfer switch that transfers power from one position to a...
Item#I180 Lepel/ Inductoheat SP12-100 kW-30 kHz

Item#I180 Lepel/ Inductoheat SP12-100 kW-30 kHz

Inductoheat /Lepel Induction Power Supply. This is a Lepel/ Inductoheat SP12-100 kW-30 kHz IGBT type induction heating power supply with Integral Heat Station. This is an older version of a currently offered Inductoheat Power Supply. The SP12 power supply is designed...
Item#I179 Semi-Automatic Pin Hardening System 25kW, 3/10 kHz

Item#I179 Semi-Automatic Pin Hardening System 25kW, 3/10 kHz

Ajax Pachydyne 25kW, 3/10 kHz pin annealing/hardening system. This is a small automatic system for Induction Heat Treating small pins. Includes a power supply with matching heat station and a small fixture for heating and drop quenching small diameter parts. Also...
Item#I178 Inductoheat Pick & Place Induction System

Item#I178 Inductoheat Pick & Place Induction System

Used Inductoheat Automated 100kW, 400 khz pick and place heat treating machine. This machine has been taken out of production due to completion of a contract. It is in good working condition and is still connected to power. It can be run for the buyer prior to...
Item#I177 Ajax 2 Station Spindle Scanners

Item#I177 Ajax 2 Station Spindle Scanners

This is an integrated Ajax 2 Station (single spindle per station) 150 kW, 10 kHz Scanner System. It has a single SCR type power supply with a transfer switch to send power to station A or B. It has a single shared Quench Recirculating System with bag filter, single...