Item#M423 Williams Dunk/Spray Washer

Item#M423 Williams Dunk/Spray Washer

Working dimensions of 36″ X 72″. X 36″. Gas fired, capable of 210F. 30A, 3 Phase. Built in 1993. Footprint; 71”Wide x 126”Deep  x 196″. Weight capacity 5,000 pounds. Oil skimmer not included. Installed, complete and in very good condition. Asking Price $29,000 USD...
Item#M422 Surface Combustion Dunk/Spray Washer

Item#M422 Surface Combustion Dunk/Spray Washer

Dunk/Spray Washer 36” X 48” X 36”. Manufactured by Surface Combustion this is a Dunk/Spray batch IQ washer with working dimensions of 36” X 48” X 36”. Electrically heated. Asking Price $22,500 USD CALL NOW FOR THE LATEST USED EQUIPMENT OFFERINGS...
Item#M421 Berg Chiller

Item#M421 Berg Chiller

Brand: Sterling. Model: GPAC-20 (2014 mfg. year). Capacity: 5 ton. Voltage: 460V/3/60. In good condition. Asking Price $8,000 USD CALL NOW FOR THE LATEST USED EQUIPMENT OFFERINGS...
Item#M420 SBS Quench Oil Coolers

Item#M420 SBS Quench Oil Coolers

SBS “Quench Airs”, (9 available).We have available 9 SBS air to oil quench oil coolers “Quench Air”. These are all in good condition and range in size from 2’ long up to 10’ long with a total of 5 different models. All are 460V. Asking from $1,000 USD for the 2’ units...
Item#M417 Soluble Oil Dunk Tank

Item#M417 Soluble Oil Dunk Tank

Working dimensions of 30″ X 48″ X 30″. Tank has a capacity of 2500 pounds.  Includes chart recorder, cooler, recirculation pump, and controls. This could easily be modified or used to water quench aluminum. Good condition. Asking Price $8,000 USD CALL NOW FOR THE...
Item#M416 Wheelabrator

Item#M416 Wheelabrator

Wheelabrator 6′ Diameter.6″ Diameter table blast wheelabrator. 30 HP belt drive. Installed and in use until March 2018. Recently reconditioned with rebuilt auger. Brand New wheel and wheel housing. Good controls with pneumatic operated control and timer to shut down...
Item#M415 Surface Combustion Parts Washer

Item#M415 Surface Combustion Parts Washer

Manufactured by Surface Combustion of Ohio this is a spray washer with working dimensions of 30″ X 48″ X 30″ high. Radiant tube gas heat and rotary drum oil skimmer and separate skim tank located on back of wash. This is partially reconditioned . It is in  overall...
Item#M414 Vacuum Residual Gas Analyzer (3 Available)

Item#M414 Vacuum Residual Gas Analyzer (3 Available)

Pfeiffer Vacuum PrismaPlus QMG220 Compact Mass Spectrometer, Mass Range 1-200 amu, Catalog # PT M06 211 111, Residual Gas Analyzer. Unused these were new in Dec. 2015 and are still in original factory packaging. Warranty expired, but still factory supported. Each set...
Item#M412 Atmosphere Engineering Endo Injector

Item#M412 Atmosphere Engineering Endo Injector

3 year old Atmosphere Engineering Endoinjector for controlling output on an endothermic generator. S/N 0601-DP1, Endo Output 600-3000 CFH. Includes PLC. Good condition and less than a third of the price of new. Asking Price $6,500 USD CALL NOW FOR THE LATEST USED...
Item#M411 SBS Quench Oil Coolers (2 Available)

Item#M411 SBS Quench Oil Coolers (2 Available)

Air to oil quench oil coolers manufactured by SBS Corporation. 480V/6/60.  External dimensions of 6′ wide X 5′ high X 21′ long. This unit has three (3) NEMA type disconnect switches mounted on side of unit. Standard “SBS Quench Air” air cooled heat exchanger with...