by Team Monty | Oct 28, 2019
Furnace Construction: Bottom Loading Retort Electric Furnace w/ Semi-Automatic Electro-Pneumatic. Loading Cart. Ceramic Fiber Insulation. RA330 Sealed Retort Contruction. Primed & Painted 3/16” Steel Shell. Working Dimensions: ø36” x 30”H. Retort...
by Team Monty | May 21, 2019
Manufactured by Surface Combustion these are gas fired units with an operating temperature of 1750 F. SSI controls. Working dimensions of 48” X 72”. Endo atmosphere with recirculating fan in the bottom. Currently installed but not in use. Excellent condition. Asking...
by Team Monty | Nov 30, 2018
Ionitech’s Plasma nitriding Cold-Wall furnace ION-75CWI, with 2 Chambers and one control. The furnace is capable of Plasma Nitriding, Plasma nitrocarburising, and Post-oxidation, processing big and small parts and tools. The furnace has been used for 4 years at...
by Team Monty | Nov 21, 2018
Lindberg Pit Nitrider. Lindberg Cyclone “Pit Nitriding” furnace with removable fan assembly & retort. There are twelve (12) bolt locks which seal the fan assembly to the gasket on the retort. Fan assembly sets on a steel stand when not in use. Alloy...
by Team Monty | Oct 29, 2018
Applied Heat Technologies (AHT) fluidized bed furnace. Treatment chamber is 300 mm diameter x 900 mm deep (roughly 12 in diameter x 36 in deep.) Maximum temperature is 1050 °C (1922°F). Maximum load is rated at 50 kg at 1000 °C (110 lb at 1832 °F) and 90 kg at 570 °C...
