System 1

Inductoheat SP11-150-200, 150 kW, 200 kHz originally seemingly built in 2012 and recertified later by Inductoheat  (around 2014) .  

This is a Power Supply and Heat station. Also included is a SSIV Base which has a tank and usually has a quench filter, pump, heat exchanger and a water recirculating and cooling system with heat exchanger and temp control. This is an excellent opportunity to retool with a simple Lift & Rotate fixture and control for use or resale at a significant price. The frequency will be usefull for hardening with shallow case depth or for heating small diameter parts.  

System 2 

"Radyne" 75TYFN30L, 75 kW, 30 kHz built in 2014. 75 kW, 30 kHz power supply which can be used for hardening medium case depths ( .060 - .100 ) and for the low end of the range (.040-.030” in steel). So this can provide a little more flexibility in case hardening than 10 kHz. It could be used to retrofit an existing Scanner or other work station with aging power.

Both systems are complete and in very good condition. Asking $30,000 USD for both systems.