Item # C377 INOX LINE 70-10-220-500-AI-TI Located In Italy

This is a second-hand furnace used for the solution annealing of stainless steel tubes in rods under hydrogen and nitrogen controlled atmosphere. It is a complete line, made up of:

  • Parts loading zone in the entry side of the furnace with conveyor belt driving group
  • Controlled atmosphere collection hood
  • Heating zone with spiral heating elements supported by ceramic tubes above and below the muffle
  • Cooling zone with water-jacket recirculation system
  • Controlled atmosphere exit collection hood
  • Unloading zone with conveyor belt idler roller
  • Refractory stainless steel mesh conveyor belt
  • Switchboard with command and control computer
  • Gas mixing board for furnace operation

Technical details:

  • Total length = 32,3 m
  • Usable heating zone = 5.000 mm
  • Prechamber length = 2.000 mm
  • Conveyor belt width = 700 mm
  • Usable height = 100 mm
  • Hourly production = 350 Kg/h nominal
  • Installed power = 300 kW
  • Consumption in operation = 196 kW
  • Hydrogen consumption = up to 55 nm3/h
  • Nitrogen consumption = up to 20 nm3/h and up to 16 nm3/h on the barriers
  • Maximum furnace temperature = 1.120°C
  • CE marking

In addition to the furnace, there are also the following spare parts:

  • N. 2 muffles for the prechamber
  • N. 2 muffles for the heating zone
  • N. 1 first cooling zone
  • N. 1 complete conveyor belt
  • N. 5 15-meter conveyor belts (possibility to make a complete belt)
  • N.1 pallet with several gaskets for the connection between channels
  • N. 17 pierced plates 50 x 50
  • N. 7 heating elements complete with supporting ceramic tubes for the heating zone
  • N. 1 heating element for the heating zone
  • N. 5 complete heating elements for the prechamber
  • N. 3 motorreducers for conveyor belt

Please contact us for asking price and further technical details.