Item # IQ 527 Complete Batch Austemper Line

We have a very rare offering, a complete batch austemper line built by AFC-Holcroft of Wixom, Michigan, USA in 2018. The line consists of the following;
 
 
General Description; The equipment has seen little use and is currently installed but not in operation. Included are spare parts, drawings, manuals, base trays & fixturing-in short absolutely everything is included. Consider the line to be in excellent condition. Vendor will dismantle.
 
AFC-Holcroft is regarded as the world leader in Batch Austemper technology; no other company in the world has built anywhere near the number of this style of furnace. Further details and many more photos are available upon request. Asking $450,000 USD. 

For More Details Contact:

Jordan Montgomery
[email protected]
647-200-2000

Item # L204 Struers Discotom-100 Automatic Saw #309

This 2013 Struers Discotom-100 is an automatic saw with a 12” blade, fully loaded.  It has been cleaned and tested, and is in good working condition.  The Discotom-100 accepts up to 12″ blade size (abrasive or diamond) and has a large T-slotted table with both automatic Y-Axis and X-Axis movement to section large workpieces automatically.  It also has a large LED illuminated chamber, and a cutting arm for manual cutting.
The Discotom-100 comes fully configured with:
This unit is located in our US warehouse for quick, affordable duty/tariff-free shipping across North America.  We’re offering this unit with a 30-day warranty at a fraction of the price of new.  Just plug and play into your modern lab.
 
Price: $26,950 USD

For More Details Contact:

Jordan Montgomery
[email protected]
647-200-2000

Item # L203 Olympus GX41F Microscope & Camera #306

This Olympus GX41F Inverted Compound Microscope is professionally cleaned and tested, equipped with 5.0MP digital USB camera.  It is in very good condition.  Outfitted with:
$5,995 USD

For More Details Contact:

Jordan Montgomery
[email protected]
647-200-2000

Item # M521 SBS “Quench Air” Air/Oil Quench Oil Coolers

We have available 9 surplus, good condition Air/Oil “Quench Air” quench oil coolers. These 1 and 2 fan units come in a number of different sizes and configurations, with most being suitable for a 36″ X 48″ X 36″ batch IQ furnace. The attached photo shows new units. These units need to move and the vendor will consider virtually any offer. More details and photos available upon request. 

For More Details Contact:

Jordan Montgomery
[email protected]
647-200-2000

Item # M520 “Surface Combustion” Allcase Rollers-Brand New

We have available over 200 rollers for use in Surface Combustion Batch IQ Furnaces & Tempers. All are cast and have never been used. Varying sizes but most are 3.5″ Diameter X .8″ Wide (wheel pin 1″ Wide X.7″ OD). More details available upon request. Asking $25.00 USD each.

For More Details Contact:

Jordan Montgomery
[email protected]
647-200-2000

Item # M519 Ipsen “Titan” Vacuum Furnace Hot Zone Spare Parts (new)

We have available a number of brand new/never used parts for an Ipsen 36″ X 48″ 2 bar “Titan” vacuum furnace hot zone. A “Titan” user purchased these and due to a hot zone redesign never used them. Pricing reflects a 15% discount over new. 

For More Details Contact:

Jordan Montgomery
[email protected]
647-200-2000

Item # T442 Recirculating Box Temper Furnace

Built by “Trent”, Serial Number 911-110. Working Dimensions 48″ Wide X 48″ High X 96″ Long. Electrically heated-82kW, 460/60/82 kW. Maximum operating temperature of 1400F. Overall dimensions of 7′ Wide X 12′ High X 10″ Long.
 
 
DESCRIPTION:   Metal Lined Recirculating Box Tempering Furnace complete with Rear-Mounted Alloy Recirculating Inner Stainless Steel Air Shrouds, Flat Hearth, and Vertical Rising Pneumatic Front Door w/Counter Weight Assist. Also
 
INSTRUMENTATION:  Side Mounted Control Panel with Eurotherm Digital Temperature Controller, Eurotherm Digital High Limit, Process Timer, AMP Meters and SCR.
 
Asking Price $59,500 USD

For More Details Contact:

Jordan Montgomery
[email protected]
647-200-2000

Item # W402 “Ransohoff” Conveyor Belt Washer

Built by “Ransohoff” in 2019 this is a SS “Leanveyor Conveyor Washer”, Serial #5999. Electrically heated, 460/3/60/170 Amps. Maximum temperature 140F/140F/180F.
Construction:
EQUIPPED WITH:
Excellent condition. Asking $65,000 USD.

For More Details Contact:

Jordan Montgomery
[email protected]
647-200-2000

Item # L202 Struers Discotom-10 Automatic Saw

This Struers 2014 Discotom-10 is a current model automatic saw, refurbished, tested and ready to ship.
 
The Discotom-10 accepts up to 10″ blade size (abrasive or diamond) and has a large T-slotted table with automatic Y-Axis movement to section large workpieces automatically.  It also has a large cutting arm for manual cutting. 
 
The Discotom-10 comes fully configured with:
 
 
Price: $23,550 USD

For More Details Contact:

Jordan Montgomery
[email protected]
647-200-2000

Item # L200 Leco TC40 Nitrogen/Oxygen Determinator

Manufactured by “Leco” this is a Model TC40 Nitrogen/Oxygen Determinator built in 2006. Good condition, complete with manuals and accessories. Please contact us for price. 

For More Details Contact:

Jordan Montgomery
[email protected]
647-200-2000