Item # L209 Leica MZ12.5 Stereo Microscope, Camera, Lightsource

Professionally cleaned and tested Leica MZ12.5 Stereoscope with light source & Leica digital camera. The zoom range 0.8-12.0, coupled with a PLAN APO objective, provides magnification of 8x – 120x.
 
INCLUDES
 
 
USD: $5,895

For More Details Contact:

Jordan Montgomery
[email protected]
647-200-2000

Item # I195 Induction Heat Treating System 150 kW, 200 kHz plus Additional 75 kW, 30 kHz Power Supply

System 1

Inductoheat SP11-150-200, 150 kW, 200 kHz originally seemingly built in 2012 and recertified later by Inductoheat  (around 2014) .  

This is a Power Supply and Heat station. Also included is a SSIV Base which has a tank and usually has a quench filter, pump, heat exchanger and a water recirculating and cooling system with heat exchanger and temp control. This is an excellent opportunity to retool with a simple Lift & Rotate fixture and control for use or resale at a significant price. The frequency will be usefull for hardening with shallow case depth or for heating small diameter parts.  

System 2 

“Radyne” 75TYFN30L, 75 kW, 30 kHz built in 2014. 75 kW, 30 kHz power supply which can be used for hardening medium case depths ( .060 – .100 ) and for the low end of the range (.040-.030” in steel). So this can provide a little more flexibility in case hardening than 10 kHz. It could be used to retrofit an existing Scanner or other work station with aging power.


Both systems are complete and in very good condition. Asking $30,000 USD for both systems.

For More Details Contact:

Jordan Montgomery
[email protected]
647-200-2000

Item # VF477 “Pfeiffer Vacuum” RGA Unit

Manufactured by “Pfeiffer Vacuum” of Germany this is a residual gas analyzer (RGA) designed for process control and contamination monitoring in vacuum systems.  RGAs are used in most cases to monitor the quality of the vacuum and detect minute traces of impurities in the low-pressure gas environment. This is a Model HiCube 80 Eco unit, Part #PM025 017 AT, Serial #16208824. Unit has been used once and is in immaculate condition. New $14,000 USD, asking $7,000 USD. 

For More Details Contact:

Jordan Montgomery
[email protected]
647-200-2000

Item # L207 Instron Wilson-Wolpert Tukon 2100B Semi-Auto Microhardness Tester

This 2004 Wilson Tukon 2100B Semi-Auto Digital Microhardness Tester is calibrated, serviced and ready to plug-and-play in your lab.  Excellent condition with a 30-day warranty.
 
Equipped with:
 – 10x, 20x and 50x lenses
 – automatic 5-position turret
 – Vickers indenter
 – Knoop indenter
 – X & Y stage with micrometers
 – Z-movement (coarse & fine) with electronic control
 – 10gf to 50Kgf test loads
 – Programming, conversions with large digital screen
 – Calibrated until September, 2026
 – maintained annually
 – 1×100-240V/50-60Hz Universal Voltage. [INV88]
 
USD: $13,950

For More Details Contact:

Jordan Montgomery
[email protected]
647-200-2000

Item # L206 Struers Duramin-2 Semi-Automatic Microhardness Tester

This 2007 Struers Duramin-2 Semi-Automatic Digital Microhardness tester is calibrated, refurbished and ready to plug-and-play in your lab.  Excellent condition with a 30-day warranty.
 
Equipped with:
 – 40x and 10x lenses
 – automatic turret
 – Vickers indenter
 – 10gf to 2Kgf test loads
 – Vickers and Knoop
 – Calibrated until September, 2026
 – 1×100-240V/50-60Hz Universal Voltage. [INV130]
 
USD: $9,975

For More Details Contact:

Jordan Montgomery
[email protected]
647-200-2000

Item # VF476 Ipsen Model HR 34 X 36 Vacuum Furnace

Built by Ipsen in 1970 this is a Model HR 34 X 36, BM313 Vacuum Furnace. Working dimensions of 24” X 24” X 30” deep.
Furnace was extensively rebuilt in 2001 and again in 2012-it has seen little use since. 2012 rebuild includes new manifold and piping along with new control system including Wonderware software. Furnace is installed and under power. Good condition. Asking $75,000 USD.

For More Details Contact:

Jordan Montgomery
[email protected]
647-200-2000

Item # L205 Zeiss AxioVert 40 MAT Inverted Microscope & Camera

This Zeiss AxioVert 40 MAT Inverted Compound Materials Microscope is professionally cleaned and tested, equipped with 5.0MP digital u-Eye USB camera.  It is in superb condition, professionally cleaned and serviced.  
 
Outfitted with:
 
 
Comes with 30 day warranty. 1x120V/60Hz Voltage. [INV320]
 
$11,995 USD

For More Details Contact:

Jordan Montgomery
[email protected]
647-200-2000

Item # M523 Cryogenic Processor

Manufactured by “Cryotron Corp.” in 2006 this is a model EC 65 Unit, Serial #11 08 06.
 
General Description; Double door batch type with working dimensions of approximately 46″ Wide X 44″ Deep X 59″ High. Cryo capacity to -320F with metered liquid nitrogen, heating capacity to +400F with internal electric elements.
 
Controls; Attached control panel with Allen Bradley PLC.
 
Excellent condition. Asking $30,000 USD. 

For More Details Contact:

Jordan Montgomery
[email protected]
647-200-2000

Item # C419 2,000 Pound/Hour AFC-Holcroft Mesh Belt Furnace Line

Built by “AFC-Holcroft” of Wixom, MI this line consists of a loader, prewash, hardening furnace, quench tank, post wash, temper furnace and Nitrogen generating system;
 

Brand new alloy radiant tubes, fans and belts which have never seen heat. Also included are new spare alloy belts and radiant tubes. Brickwork in very good condition. This line is installed but not currently in use. 

 
All manuals and drawings are available and included. Asking $499,000 USD.

For More Details Contact:

Jordan Montgomery
[email protected]
647-200-2000

Item # M522 DeKalb Blowers “UNUSED” $5,750.00 USD

Manufactured by “DeKalb Blower Inc.” of Yorkville, IL we have available two motor/blower units;
 
Unused these are in “like-new” condition. Asking $5,750.00 USD Each. 
 

For More Details Contact:

Jordan Montgomery
[email protected]
647-200-2000