Item # O421 Electric Wisconsin Oven 500F (Brand New)

MODEL NUMBER: EWN-1010-8E
Working Dimensions of 10′ Wide X 10′ Deep X 8′ High
SERIAL NUMBER: 19298-1-1-2210
MAX TEMP: 500°F
TYPE OF FUEL: ELECTRIC
MAX INPUT HR 72 KW
VOLTAGE: 480Y/277
FULL LOAD AMPS: 111 A
WIRING DIAGRAM: 501-960-0039-1
LARGEST MOTOR AMPS: 14 A
YEAR CONSTRUCTED: 2022
UL TYPE
SHORT CIRCUIT CURRENT
3~ 60 Hz
480 V~MAXIMUM

Asking Price: $40,000 USD or best offer

For More Details Contact:

Jordan Montgomery
[email protected]
647-200-2000

Item # M525 Dry Coolers Omni-Chill Industrial Packaged Chiller

Description: AIR-COOLED CHILLER
Model Number: PAC-060RH-1R-3 H-1R-30PE-1F-1P
Electrical Diagram: J-4272-1EL
Voltage / SCCR: 460V/3Ø/60Hz/ 10kA
Total FLA/ Largest Motor: 27.0A / 22A
Overcurrent Protection: Not Provided
Enclosure Rating: NEMA / Type 1
Design Flow / Pressure: 15 GPM / 40 PS
Operating Range: 60F-80
Refrigerant Charge / Type: 15lb-2oz lbs./ R134a

For More Details Contact:

Jordan Montgomery
[email protected]
647-200-2000

Item # M524 Dry Coolers Aqua-Vent

Built by Dry Coolers of Oxford, Michigan this is a completer furnace cooling system. Complete and in excellent condition. Currently in indoor storage. Asking $50,000 USD.

Furnace Cooling Package
Model Number: CSX-400-1500-EDP
Electrical Diagram: J-4272EL
Voltage / SCCR : 480Y/277V/30/60Hz/ 50kA
Largest Motor: 34.5A/34A
Overcurrent Protection: Not Provided
Enclosure Rating: NEMA/Type 4
Design Flow / Pressure: 442 GPM / 60 PSI

For More Details Contact:

Jordan Montgomery
[email protected]
647-200-2000

Item # M523 Cryogenic Processor

Manufactured by “Cryotron Corp.” in 2006 this is a model EC 65 Unit, Serial #11 08 06.

General Description; Double door batch type with working dimensions of approximately 46″ Wide X 44″ Deep X 59″ High. Cryo capacity to -320F with metered liquid nitrogen, heating capacity to +400F with internal electric elements.

Controls; Attached control panel with Allen Bradley PLC.

Excellent condition. Asking $30,000 USD.

For More Details Contact:

Jordan Montgomery
[email protected]
647-200-2000

Item # M522 DeKalb Blowers “UNUSED” $5,750.00 USD

Manufactured by “DeKalb Blower Inc.” of Yorkville, IL we have available two motor/blower units;

Model BT-200-100-P9-FC-CW/CCW-D1150-T10-5-XA-ZA
1-CW rotation & 1- CCW rotation
10” insulated plug
Integral inlet cone
1150F maximum temperature
No atmosphere shaft seal- only standard air dam shaft gasket (not gas tight). 5630SCFM@ 2.5”SP @ 1521RPM @ 3.41HP @ STD. AIR (70F-0FASL)

Unused these are in “like-new” condition. Asking $5,750.00 USD Each.

For More Details Contact:

Jordan Montgomery
[email protected]
647-200-2000

Item # M521 SBS “Quench Air” Air/Oil Quench Oil Coolers

We have available 9 surplus, good condition Air/Oil “Quench Air” quench oil coolers. These 1 and 2 fan units come in a number of different sizes and configurations, with most being suitable for a 36″ X 48″ X 36″ batch IQ furnace. The attached photo shows new units. These units need to move and the vendor will consider virtually any offer. More details and photos available upon request.

For More Details Contact:

Jordan Montgomery
[email protected]
647-200-2000

Item # M520 “Surface Combustion” Allcase Rollers-Brand New

We have available over 200 rollers for use in Surface Combustion Batch IQ Furnaces & Tempers. All are cast and have never been used. Varying sizes but most are 3.5″ Diameter X .8″ Wide (wheel pin 1″ Wide X.7″ OD). More details available upon request. Asking $25.00 USD each.

For More Details Contact:

Jordan Montgomery
[email protected]
647-200-2000

Item # M519 Ipsen “Titan” Vacuum Furnace Hot Zone Spare Parts (new)

We have available a number of brand new/never used parts for an Ipsen 36″ X 48″ 2 bar “Titan” vacuum furnace hot zone. A “Titan” user purchased these and due to a hot zone redesign never used them. Pricing reflects a 15% discount over new.

For More Details Contact:

Jordan Montgomery
[email protected]
647-200-2000

Item # M518 “WS” Burners/Controllers/Spare Parts-“BRAND NEW”

We have available a number of brand new, never out of the box “WS” Burners, Controllers & Spare Parts. Vendor overstocked and has no use for these. Available immediately-still in the original packaging. Please contact us for a complete list of all the spare parts available. New these items were $69,864.83 USD. ASKING $35,000.00 USD!!