Item # T436 Surface Combustion 36″ X 48″ X 36″ Draw Furnace

Built by “Surface Combustion” of Maumee, Ohio, USA this is a Model SDG 36-48-36 Draw Furnace. Gas fired, maximum operating temperature 800F. Complete. Asking $7,500 USD.

For More Details Contact:

Jordan Montgomery
[email protected]
647-200-2000

Item # T435 Wisconsin Oven Batch Oven 72″ X 48″ X 48″ 1200F

Manufactured by Wisconsin Oven in 2007 this is an Electric Batch Furnace, Model 7/3/5-E13, Serial Number 106200701;

Internal useable dimensions: 72” wide x 48” high x 48” deep
Fitted with ten (10) removable shelves, 72” wide x 48” deep with 4” separation
Operating Temperature: 1300° F Maximum, Temperature uniformity: +/- 25° F @ 400° F & 900° F
Input / Hr.: 144 KW, Voltage: 480/3/60
Controls: Honeywell with chart recorder

Features and comments

· Two (2) 1 hp vacuum pumps and one (1) 10 hp circulation pump

· Gate type up acting door – pneumatic with two (2) cylinders.

· Overall dimensions: 14’ high x 13’ wide x 6’ deep (approx..)

· Approximate shipping weight: 9,500 lbs.

· Safety interlocks

· Ex-major aerospace facility. Used as “burn off” oven for SPF and diffusion bonding work.

· Has seen little use. New cost Was $250,000 in 2007

This furnace is in excellent condition, is complete and ready to go. Asking USD $65,000.00 loaded on truck.

For More Details Contact:

Jordan Montgomery
[email protected]
647-200-2000

Item # T430 Surface Combustion 36 X 72 X 36 Tempers-Like New!

Manufactured by Surface Combustion of Maumee, Ohio these are rebuilt, gas fired, like new tempers with a full warantee (3 available).

Load Size: 36x72x36
Temperature Range: 300 F –1400 F
Gas Fired, New NFPA 86 Gas Train and Package Burner
Refractory: Repaired in good condition.
Controls: All New Control Panel with Honeywell temperature controller
Rebuilt Recirculation Fan with New Motor.
New paint. Tested and ready to ship.

Asking $110,000 USD Each.

For More Details Contact:

Jordan Montgomery
[email protected]
647-200-2000

Item # T433 Temper Furnace 36″ X 54″ X 30″-Gas Fired

Manufactured by Surface Combustion of Maumee, Ohio, USA this is a gas fired temper furnace with working dimensions of 36″ X 54″ X 30″.

1250F Operating Temperature
480/3PH
Recently Removed From Service
Honeywell Controls
“Force Air” Model, Serial Number BC-41950-1

Good condition. Asking $20,000 USD

For More Details Contact:

Jordan Montgomery
[email protected]
647-200-2000

Item # T434 Surface Combustion “Super 30” Temper

Manufactured by Surface Combustion of Maumee, Ohio, USA this is a “Super 30″ Temper with working dimensions of 30″ X 48″ X 30”;

Electrically heated 480v/3ph/60cy
Free standing control panel with Honeywell Digital Controller, Overtemp & Honeywell Tru-line Recorder.
Maximum Operating Temperature 1350F.

Complete, currently in indoor storage. Asking $19,500 USD

For More Details Contact:

Jordan Montgomery
[email protected]
647-200-2000

Item # T425 Car Bottom Furnace/Exo Atmosphere/1450F

Manufactured by Williams Industrial Service, Inc., this is a gas fired car bottom furnace with working dimensions of 80″ Wide X 192″ Deep X 60″ High, Serial numbers #02617, #02618 & 02619.

Hearth Level 30″ above floor level
35,000 Pound maximum load
Maximum temperature 1450f, +- 25F
Exothermic Atmosphere with Nitrogen Purge
Eurotherm controls and High Limit

General Description; This unit is a tube fired car bottom unit with an operating range from 500F to 1450F. The maximum loading is 35,000 pounds. The car and door are manually operated by the furnace operator. The furnace is equipped with a programmable controller and is capable of both heating and cooling. The furnace is lined with ceramic fiber for quick heat up and cool down capabilities.

The car is insulated with IFB shapes with hard brick pier areas for the load to be placed on. The furnace to the car seal is accomplished by raising or lowering the actual furnace with a hydraulic system.

Complete and in good operating condition but will require one fan assembly. Asking $88,000 USD.

For More Details Contact:

Jordan Montgomery
[email protected]
647-200-2000

Item # T420 Surface Combustion “Uni Draw”

Manufactured by Surface Combustion of Maumee, Ohio this is a “Uni Draw” batch temper with working dimensions of 24” X 36” X 24” high. Serial Number BC-44111-01. Natural gas heated. 480/3/60. Maximum operating temperature of 1400F. Good condition overall, alloy and refractory good.

Asking $40,000 USD loaded.

Item # T412 Lindberg Pit Temper Furnace 1250F

Manufactured by Lindberg this is a gas fired pit temper furnace, Model 2828-G12, Serial number 9832.

Voltage 480/3/60
Working dimensions 28″ diameter x 28″ deep
Exterior dimensions 60″ W x 104″H x 110″L
Maximum operating temperature 1250F
Controls; Mounted and wired in free standing panel includes Honeywell UDC digital temperature controller and high limit. Honeywell digital paperless (EzTrend) recorder.
Description: Standard Lindberg gas fired pit tempering furnace with manual swing type cover complete with Eclipse combustion system.

Very good condition. Asking $8,500 USD