Item # IQ528 Complete “Super 30” Batch IQ Department Available
We have available a complete batch IQ department which consists of two 30″ X 48″ X 30″ “Surface Combustion” batch IQ furnaces, two “Williams” charge cars, one “Williams” two stage washer, one “Williams” batch spray washer and several “Williams” tempers. Equipment is complete and in operation until recently.
- “Surface Combustion”, gas fired “Super 30 Allcase” with working dimensions of 30″ x 48″ x 30″. Top cool option, serial# BC43200-1 with complete SBS air to oil cooler and duct work.
- “Surface Combustion”, gas fired “Super 30 Allcase” with working dimensions of 30″ x 48″ x 30″. Serial number BC42654-1 with complete SBS air to oil cooler and duct work.
- “Williams” charge car suitable for a 30″ X 48″ X 30″ batch IQ furnace. S.E.E.R., 480V, 3ph. Built 1988. Serial number 02206.
- “Williams” charge car, same as above, Serial number 02195 built 1987
- “Williams” 2 stage gas heated dunk washer. 200F, 180.000 BTU
- “Williams” spray washer, gas 200F 180.000 BTU Serial#02200
Vendor will sell items on an individual basis and will seriously consider any and all offers.
For More Details Contact:
Jordan Montgomery
[email protected]
647-200-2000
Item # IQ 527 Complete Batch Austemper Line
-
UBQA 36-48-36G universal batch austempering furnace
-
UBT 36-48-36-14G batch temper furnace
-
UBW 36-48-36 universal spray/dunk prewash
-
UBW 36-48-36 universal dunk cold water wash
-
UBTC 36-48DE double ended batch transfer car
-
USL 36-48 scissors table
-
UST 36-48 stationary table
-
UHT salt holding tank with transfer pump
-
EZ1800 series endothermic generator
-
All items are sized for a load 36″ X 48″ X 36″
-
Load capacity of 3500 pounds
-
Gas heated
For More Details Contact:
Jordan Montgomery
[email protected]
647-200-2000
Item # IQ 526 Surface Rebuilt 36 X 72 Batch IQ-Save Over $250,000 USD Vs; New
For More Details Contact:
Jordan Montgomery
[email protected]
647-200-2000
Item # M510 4 SBS Quench Airs (BRAND NEW)
Quench Air Model 5084-1F – 1x Fan – Oil Cooler – $13,900.00 USD
- 230VAC 1Phase 60Hz / FLA: 23.4 / Minimum Breaker Size: 25A
- 1x 42in 5HP Single Speed Motor (NO VFD)
- Noise Level @ 3ft/1m (Full Speed) <74.0db
- NEMA 3R Safety Lockout / Tagout
- Oil Volume: 120L / 34gal
- Connections: 2in ANSI Flange
- Dimensions: 108 x 66 x 60 / In 275 x 168 x 153 cm
- Lifting Eyes: Four (4)
- Inspection Port 2.0in
- Vent / Drain 0.75in
- Materials: Frame: Epoxy Coated Steel
- Plenum: Galvanized Steel
- Tube: Carbon Steel with Aluminum Fins
Quench Air Model 5084-1F – 1x Variable Speed Fan – Oil Cooler – $15,800.00 USD
- 230VAC 1Phase 60Hz / FLA: 23.4 / Minimum Breaker Size: 25A
- 1x 42in 5HP Variable Speed Motor with VFD
- Noise Level @ 3ft/1m (Full Speed) <74.0db
- NEMA 3R Safety Lockout / Tagout
- Oil Volume: 120L / 34gal
- Connections: 2in ANSI Flange
- Dimensions: 108 x 66 x 60 In / 275 x 168 x 153 cm
- Lifting Eyes: Four (4)
- Inspection Port 2.0in
- Vent / Drain 0.75in
- Dry Weight: 2,312 lbs / 1,049 kg
- Materials: Frame: Epoxy Coated Steel
- Plenum: Galvanized Steel
- Tube: Carbon Steel with Aluminum Fins
For More Details Contact:
Jordan Montgomery
[email protected]
647-200-2000
Item # IQ520 Surface Combustion Batch IQ-36X48X36
-
Working Dimensions of 36″ X 48″ X 36″
-
Natural Gas fired, maximum operating temperature of 1850F
-
480Volt
-
PLC Controls
-
Includes Top Cool & Rear Handler
-
Rebricked Arch & Jam, Relined inner door, all other refractory repaired
-
New rails, chain guide, rollers and pusher head
-
New control panel with SSi controls, entire furnace rewired.
-
All other components would remain “as is”
For More Details Contact:
Jordan Montgomery
[email protected]
647-200-2000
Item # IQ519 36–48–36 Surface “Super 36” Allcase Furnace
-
Hot oil capable
-
Allen Bradley SLC500 motion controller
-
Natural Gas Fired – Max. Temp 1750
-
480 VAC / 3 Phase / 60 Hz
-
Integrates into 36-72 line
-
Set up for endothermic atmosphere
-
Also available are tempers, washer and charge car
-
Currently in indoor heated storage
For More Details Contact:
Jordan Montgomery
[email protected]
647-200-2000
Item # IQ516 AFC Charge Cars (2 available)
-
Serial #61754
-
Suitable for a 36″ X 48″ tray, 3,000 pound capacity
-
480/3/60
-
External dimensions of 6′ Wide X 7’5″ Hight X 7’8″ Long
-
Controls; Side mounted control panel with an Allen Bradley SLC500 PLC Controller
For More Details Contact:
Jordan Montgomery
[email protected]
647-200-2000
Item # IQ 515 AFC Batch IQ Furnace, 36″ X 48″ X 36″
-
Serial #61743
-
Working dimensions of 36″ X 48″ X 36″
-
Natural Gas
-
Maximum temperature of 1750F
-
480/6/60
-
Complete and in good condition.
For More Details Contact:
Jordan Montgomery
[email protected]
647-200-2000
Item # IQ514 Ipsen Sealed Quench Furnace TQ2 EM (LOCATED IN THE UK)
-
Electrically heated, total connected load 45Kw
-
Temperature operating Range 570C to 1,000 C, +-12C
-
Nitrogen/Methanol for Endo Gas
-
Oil quenching
-
Eurotherm Control System
-
Manual furnace loader and unloading table included.
For More Details Contact:
Jordan Montgomery
[email protected]
647-200-2000
Item # IQ513 Surface Combustion Batch IQ Furnace 36”W x 72”D x 36″H
-4 U-tubes, Eclipse burners
-Two (2) probes
-Two (2) SSi reference air/BO air boxes
-Power: 460 V, 3-phase, 60 Hz
-Atmosphere: Manual with Waukee (3) air, natural gas, endo
-Fans: Two (2) water cooled fans
-SBS oil cooler
-Extensive repair in 2018
-Brick & Alloy in good condition
For More Details Contact:
Jordan Montgomery
[email protected]
647-200-2000