|
Batch |
Continuous |
Draw/Temper |
Generators |
Induction |
VacuumFurnaces |
VacuumPumps |
LeakDetectors |
Testing |
Salt |
Miscellaneous
See something you need,
click on the link or scroll through all the items for sale.
Searching for something we don't have listed, fill out our
contact form.
Item #M229 Cast Alloy Trays.
13 ea. 24 x 24” cast alloy trays from a Holcroft Pusher in HU along with 8 ea.
10” High 330 corrugated boxes. All are new. Trays are HU, boxes are 330 with
mesh bottoms. Market price today: ~ $ 27,000.00 Asking: $ 15,000.00US 
Item #M228 McQuay Chiller.
Model # ALR050C 50 ton capacity Air Cooled Water Chiller with: 4 Cooling Fans, 2
Compressors for refrigerant (R-22), 1 Heat Exchanger, 2 Water pumps for process
and system control panel for pumps. Unit purchased new in 2003, never
installed! Asking Price: $17,500.00US. If interested, please contact us at
TheMonty.
 
Item #M227 Used AGF
Cast 2420 Retort. Overall length including the shaft = 308 5/16”. Cast
body dia. = 25 3/4" . Machined portion of the cast body on charge end = 25 3/8”.
One retort has 3” high flights and the other has 6” high flights. Retort pitch =
12” and the last 2 flights = 15”. Retort thickness = 7/8” in first half of the
retort body and the last half = 1 1/16” thick. Support shaft for drive sprocket/
bearing and seal OD dimensions are 7.740” / 7.873” / 8.50”. Support shaft ID =
6”. Bell end has 3 openings for product drop. There are (4) seal rings welded on
the outside of the retort body. HT material. Approx. weight of retort = 8,215#. Asking Price: $20,000 USD. Please contact us at
TheMonty.
Item #M226 New AGF
Cast 2420 Retort. Overall length including the shaft = 308 5/16”. Cast
body dia. = 25 3/4" . Machined portion of the cast body on charge end = 25 3/8”.
One retort has 3” high flights and the other has 6” high flights. Retort pitch =
12” and the last 2 flights = 15”. Retort thickness = 7/8” in first half of the
retort body and the last half = 1 1/16” thick. Support shaft for drive sprocket/
bearing and seal OD dimensions are 7.740” / 7.873” / 8.50”. Support shaft ID =
6”. Bell end has 3 openings for product drop. There are (4) seal rings welded on
the outside of the retort body. HT material. Approx. weight of retort = 8,215#. Please contact us at
TheMonty and Make an offer.
Item #M225
New AGF 34-8 Batch Furnace
Retort. Cast HT alloy material. Asking $25,000
USD.
Item # M224
Pit
Furnace Fixturing. Available are three never used nesting pit furnace
baskets in RA330 material. Baskets are 20” tall x 51” ID x 54” OD. There are egg
crate bottoms with screen on top of the egg crate. They interlock in a stack,
and can be lifted separately, as one. Asking $27,000 USD.
Item #M223
Inconel insert for a pit type furnace. It is in perfect condition and
has been used for Air Tempering only. The side is solid material as the pictures
show and the bottom is a heavy cast grate material. Inside Dimensions: 36" Deep
by 33" Diameter. Asking Price $4500.00US.
Item #M221
B.O.C./Edwards Vacuum Pumping System. Blower Stokes Model 900.607-001x5,
Serial# RS 0037762. Pump Ser.# 12297439. 20 HP, 1750 RPM motor. Manufactured
2006. Asking $18,000.00US
Item #M220
Cincinnati Sub-Zero Freezer. 1988 Cincinnati Sub-Zero Freezer, Model
T-21-2-2-EXP-S/WC, S/N 88-11124, Certified in range of -30ºF to + 25ºF, Surveyed
at +/- 10ºF, 460V, 3-Phase, 60Hz, 15Amp, Work Zone Size: 24"W x 60"L x 26"H
Price: $7,500US Immediate Availability, Location: Portland, Oregon.
Item #M219 SBS
"Quench Air" Air/Oil Heat Exchanger. Rated for a continuous
furnace of 4,000 pounds. Outside dimensions of 15’ long X 5’ wide with 3 fans.
Approximately 10 years old. This was installed and running until just a few
months ago. Currently in storage. New this would be about $15,000 USD. Asking
$2,000.00 USD. Immediate availability.
Item #M217
Alnor Dewpointer. Used Alnor Dewpointer, Model 7000U, in good
working condition. 110V A/C, alt. 6 Volt Battery Operation, circular
calculator, filter and filter material, tube connector Price: $950.00US
As-Is, with 30 day right of return for full refund. Location: Coeur
d'Alene, Idaho
Item #M215
Complete Surface Combustion 7200 CFH Generator Pumping System.
Includes the roots blower, Motor, all regulators, flowmeters that were
installed with the system. Also included will be the motor starter
for the mixing pump. Asking Price: $2,500US New Price: $950.00US OBO
Item #M211 Moly Nuts.
1/4-20 Moly nuts 4.50 ea, 3/8-16 Moly nuts 8.00 ea, 1/4-20 x 1" Moly studs
3.00 ea, Prices are F.O.B. South Gate CA.
Item #M203
Regenerative Thermal Oxidizer
Unit/TURNER ENVIROLOGIC.
A rather unusual item. Very briefly this
unit is used to burn VOC's from solvent based coating processes. This system
was new in 2004 and was only used for 6 months. The current vendor purchased
it and never installed it, currently it is being stored in an indoor heated
warehouse. It is in excellent condition, complete and fully operational. A
new unit this size would be approximately $220,000 US, vendor is asking
$75,000 US. Please let us know at "The
Monty" if you require further details.
Item #M197
VFS Moly Elements.
(2) new factory moly elements for a model HL36HS
vacuum furnace. Asking Price: $800.00US each. F.O.B. South Gate CA.
Item #M193
ITE Distribution Panel.
1600 AMPS
227/480 Voltage, 11 breakers ranging from 100 to 400 Amps. 1974 Vintage.
Excellent condition. Asking Price $6,000US.
Item #M175
Vanadium carbide system
fits in an area 25 x 50 feet. The coating line
measures 8 feet x 28 feet, and consists of a pre-heating furnace, the
vanadium carbide coating vessel, an oil quenching tank and a wash station.
Assembled loads are moved from station to station using an overhead hoist.
Controls for the line may be housed in a remote location.
View of line from pre-heat
furnace
The specifications for the
production system are as follows:
1. Direct Fired Gas Preheat
Furnace.
· Temperature of Operation:
650°C (1200°F) · 425,000 Btu/hr input · Work chamber 36 inches X 36 inches X
36 inches · Automatic cover drive
2. Gas Fired Retort Furnace
for VC coating
· Temperature of Operation:
1065°C (1950°F) maximum · Type 310 alloy retort, 24 inch diameter X 36 inch
deep, 3/8 inch thick · Two zone gas fired burner system (total 750,000 BTU/hr
gross) · Work locator and support rails for positioning fixtures · Automatic
cover drive
3. Radiant Tube Gas Fired Oil
Quenching Tank
· Designed to quench 1000
pounds maximum from VC treatment temperature · Operating temperature
200-250°F, variable speed quench agitator · Internal bath size 60 inches X
72 inches X 48 inches deep ( quenching shroud 36 inches X 36 inches X 36
inches),
Oil capacity 850 gallons. ·
Rated at 300,000 BTU/hr heating capacity · Air cooled quench oil heat
exchanger
4. Radiant Tube Gas Fired Hot
Water Rinse Tank
· Internal size 42 inches X 42
inches X 56 inches deep · Rated at 65,000 BTU/hr, 180°F operating
temperature · Submerged spray educator system
5. Load/unload Station for
Fixture
6. Variable Speed Mixer for VC
Salt
7. The equipment was designed
by Metlab. The equipment was manufactured by Upton Industries in Detroit.
3. The pot size, as shown is
24 inches diameter by 36 inches deep x 3/8 deep. The retort for the system
currently needs repair/and or replacement.
The equipment is approximately
three years old, and has seen relatively light usage. Except for the retort,
it is in almost new condition.
Asking Price: $85,000.00US.
Item #M164
AGF D/A Generator.
1500 CFH. Model 7.5 Serial#831341.Natural gas Fired.
Retort recharged in 1995 using Koeble nickel catalyst. At the same time the
electrical system and valve system were also rebuilt. Since that time it has
really not been used. Appears to be in good shape although it is missing the
controller (an Omega CN 4401TR-A) and the blower is missing. Shipping weight
2,000 pounds, overall height is 7' 2". Electrical ladder diagram available.
Asking price $9,000 US.
Item #M149
Surface Combustion Charge Car.
Single
ended unit for use with a Surface Super 30 Allcase furnace. 575V. In
operation until very recently. Currently in indoor heated storage.
Reasonable condition. Asking $9,000 US.
Item #M148
Surface Combustion Washer.
For use with a Super 30 Allcase furnace. Early 1980's
vintage, spray only, electric with 2 new heaters. Model VC-42278-1. 65 KW,
480 Volt. 200F maximum operating temperature. Good condition. Asking $10,000
US.
|
