See something you need, click on the link or scroll through all the items for sale. Searching for something we don't have listed, fill out our Contact Form.
Item #G158 Lindberg 500 CFH Endo Generator. Model #16-RO500-A3 HyGen; Electric Heating:
208/3ph/360Hz 16 KW; Air cooled, SSI dewpoint control. Good condition.
Spare Elements, Catalyst, and FireCheck. Complete and ready for operation.
Asking $10,000 USD
Item #G157 Surface 2400 CFH Endo Generator. While this is an older unit it is complete, has air cooling and is ready to go. With an asking price of $5,000 USD it would be very hard to go wrong.
Item #G156 Surface Combustion 3000 CFH Endo Generator. SBS air cooling, SSI dewpoint control. Good condition, in use until 2 months ago. Absolutely complete and ready for operation. Asking $15,000 USD
Item #G154 Genron Nitrogen Generator. Genron PSA unit model 20010. New in 1990 and very lightly used. Very few details so far about this unit except it is in excellent condition, still installed but not in use. This was new in 1990 and was $107,299.00 USD at that time. Asking price of $25,000 USD
Item #G151 Endo Generator, 3000 CFH. Manufactured by the JL Becker Company in 1995 this is a gas fired endo generator with air cooling. Brick Lined complete with (2) Retorts, Eclipse Burner System, Eclipse Blower, Waukee Pump, Waukee Mixer, Waukee Flowmeters, and Selas Firecheck. Control Panel complete with Honeywell 3000 Series Digital Temperature Controller, Honeywell Digital High Limit, Honeywell 5000 Series Digital Carbon Controller, and PCI Flame Safety. Overall dimensions 106" Wide x 114" Deep x 116" High. Approximate weight 14,000 pounds. Excellent condition. Asking $34,500 USD.
Item #G150 Surface Combustion 5,000 CFH Endo Generator. Model RX-25-50, S/N BC41611. Gas fired, 1950F. Two retorts, air cooling, Spencer blower, Waukee pump, Eclipse Safety shut-off valving and Selas firecheck. Side mounted control panel with Honeywell 3000 series digital temperature controller and high limit. Additional free standing control panel with "Endo Quench" system with Honeywell 3000 Series controller. Overall dimensions 80" wide X 96" long X 138" high. Approximated weight 8,000 pounds. Very good condition. Asking $24,500 USD.
Item #G149 Surface Combustion 2400 CFH Endo Generator. Model S-2-N. Natural gas fired endo generator, 2 retort 2400 CFH capacity. Air cooling, Roots pump, Spencer blower, Waukee flowmeters and oxygen probe. Control panel with Yokogawa digital temperature controller and Yokogawa high limit. Complete, very good condition. Asking price $17,500 USD.
Item #G147 GE Exothermic Generator (Low Ratio). 1500 CFH Capacity. Model 9328312-G2. Outside dimensions of 36” wide X 84” high X 96” long. Gas fired 480 volts/3 phase/60 cycle. Newer updated Honeywell digital controls for temperature, water and alarms. Good condition. Newer Waukee flowmeters, Selas burners and fire check valve. Asking Price: $12,500 USD.
Item #G145 Surface Combustion 5400 CFH Endothermic Atmosphere Generators (4 available) These are gas fired, 3 tube units each rated for 5,400 CFH. All units are identical and were built in 1980. Air cooling. Well maintained and fully operational at time of de-installation. All equipment stored in heated facility. Asking $25,000 USD each.
Item #G144 Surface 5600 CFH Endo Generator. Atmosphere control and water cooling. Gas Fired. Pumps are new, catalyst is new and retorts are in good shape. Please note that in the photos the top hats have been removed for shipping which of course means a visual inspection of the catalyst and retorts is very easy. Asking $25,000 USD.
Item #G142 Ammonia Dissociator. Lindberg HYAM Ammonia Dissociator. Type 16-RO-1000-HYAM. While we don’t have a great deal of information about this unit it was in working order when it was removed from service, the lid insulation, breakers and gauges were replaced and overall it is in good condition. Asking price $5,000 USD.
Item #G136 Surface Combustion 5000 CFH Endo generator.
This generator appears to be in excellent condition. Gas fueled. Barber-Coleman strip with digital recording instrumentation and over-ride controls. Max. temp: 1950°F. Approx. outside dimension: 8'5"W x 10'1"H x 8'11"L. Air cooled. Asking Price: $29,500 USD.
