|
Batch |
Continuous |
Draw/Temper |
Generators |
Induction |
VacuumFurnaces |
VacuumPumps |
LeakDetectors |
Testing |
Salt |
Miscellaneous |
Furnace Parts
See something you need, click on the
link or scroll through all the items for sale.
Searching for something we don't have listed, fill out our fill out
our contact form.
Item #T177 30x30x30
Gruenberg Box Temper Furnace.
Gruenberg Model B120c100, Serial # 25629, 1200°F max. Temp., Temper
Furnace, Recirculation Fan, Work Zone: 30" W x 30" D x 30" H, Overall Size:
42"Wx6'Dx5'H, Electric, 230V/3Phase/12kW, Practically new condition, not
used by current owner, Operation has been verified, Controller is European
(German?) and owner can't figure out how to fully operate it. (Controller
would be easy and cheap to replace.) New in mid-1990's. OEM still in
business to support this unit. Price: $3,900 Location: West Coast U.S.
 
Item #T176
Lindberg Pit Temper (Air atmosphere) Furnace.
1250°F, Gas-Fired, Eclipse 600,000 BTU/hr Burner, Work Zone: 32"
Diameter x 42" High, Overall Dimensions: 4ft W x 10ft D x 8ft H,
Barber-Coleman 560 Temperature Controller with Honeywell UDC Overtemperature
Controller, Honeywell Circular Chart Recorder, Fair Condition. Interior of
furnace is a little banged up, but still works fine. Location: West Coast
U.S. Price: $4,500 Offers Considered
Item #T175 Box Draw Furnace.
1970
vintage, working dimensions of 5’6” deep X 9’6” wide X 4’6” high. Operating
temperature of 1400F. 2 direct fired 1 million BTU burners. Brick lined.
Controls are RKC, Johnson, Honeywell and Fireye. 575 volt, 30 amp, 3 phase.
Currently installed and operating. Best offer.
 
Item #T174 Aging Ovens (3 available).
These precipitation furnaces were used for aluminum aging. All are identical
and 1977 vintage. 1 direct fired 1 million BTU burner in each. Operating
temperature 600F. Controls-RKC, Johnson, Honeywell. 575 volt, 60 Amp, 3
phase. Working dimensions of 12’6” deep X 10’ wide X 8’ high. One
Recirculating fan. Interior is fibre board/mild steel. Units are installed
and operating. Asking $5,000 each.
Item #T173 Tempering Oven. Car
Bottom Style Draw Furnace. Working dimensions of 21’6” long X 5’ wide X 4’
high. Built in 1978. Operating temperature of 1400F. Two direct fired
burners, 1 million BTU’s each firing into a “hot box”. 2 recirculating fans
in the roof. Controls are RKC, Johnson and Honeywell. Interior is fibre
board covered with SS sheet. 575V, 30 amp, 3 phase. Temperature uniformity
is 10-15+-. Currently installed and in operation. Asking $35,000.
Item #T172 Tempering Oven. Car
Bottom Style Draw Furnace. 1995 vintage, working dimensions of 12’ deep X 5’
wide X 4’ high. 1 one million BTU direct fired burner firing into a “hot
box”. Interior is fibre board covered in SS sheet. 1 recirculating fan.
Capable of a 10,000 pound load. Currently installed but not in use. Requires
a new controller. Asking $20,000.
Item #T171 Ipsen Tempering Furnace.
Model DLR-304830. Working dimensions of 30” X 48” X 30”. Electrically heated
480V/60/3 phase. Operating temperature of 1400°F.
Built in 1979. New Price: $16,000 USD or best offer.
Item #T170 Precision
Quincy Tempering Oven. Model 42-1000. Working dimensions of 42 x 42
x 42 inches. Electrically heated 480V/60/3 phase. Operating temperature of 1000°F.
Built in 1985. New Price: $12,160 USD or best
offer.
Item #T168 Despatch
Car Bottom Oven. Working dimensions of 10'6” wide X 50’ long X 10’
high. Outside dimensions of 18’ wide X 51’ 4” long X 17’ 3” high. Gas fired with
a maximum operating temperature of 1250F. 480V/3ph/60cycle. Furnace is fibre
lined with 2 zones of control. Two doors, one at either end and two cars. Free
standing control panel with Cutler Hammer Panel Mate PLC Controller, Chessell
digital round strip chard recorder, Honeywell digital overtemps. Excellent
condition! Asking price: $137,500.00US
Item #T167
Beavermatic Tempering Oven. Model 24x36x24GIT work load area 24" x 36" x
24"h, 750# gross load rating, operating temp. 350-1400 deg. F, 480,000 BTU
indirect gas fired, 10,000 BTU after burner retrofit package, 2 HP alloy
circulation fan, NEMA 12 cabinet with Erotherm controllers & overtemp.
Instruments, Honeywell circular chart recorder. Purchased in 2002, has less than
200 hours use. Overall dimensions are 6'-0"W
X 5'-11"D X 8'-6"H. Asking Price: $25,000.00US
Item #T166
Recirculating Air Belt Tempering Furnaces (2 available). While one was
built by Standard Fuel Engineering and the second by Therm Alliance for all
intents and purposes both are virtually identical. Overall furnace width inside
6’ 6”, conveyor width 6’, height above belt 12”, furnace overall width 11’ 6”,
overall furnace length 52’, overall height 11’, furnace length 42’. Capacity at
400F 5,000 pounds/hour. Maximum operating temperature 750F. Electrically heated,
maximum heating input 400KW, 480/3 phase/60HZ. Recirculating fan capacity 40,000
CFM. The Standard Fuel Engineering was built in 1977 and the Therm Alliance was
new in 1994. Price at that time was $171,600.00 USD. Both ovens are in good
shape and ready to go although not currently operating. Asking price for the
Standard Fuel unit is $22,500 USD. Asking price for the Therm Alliance furnace
is $42,750 USD. Contact us at The Monty
for more detailed information. New Prices
Item #T164 CI Hayes
Temper Furnace. Model HBO-242436-12 Tempering Oven. Work zone is 24 " x
24 " x 36 " Long. New in 1989. Electrical 600 V, 3Ph, 60 Hz, 40 KVA. Maximum
operating temperature is 1150F. Currently installed and in excellent operating
condition. Asking $15,000.00.
Item #T162 Mocco Drop Bottom Furnace.
Mocco Thermal Industries, drop
bottom, aluminium solution treatment furnace for sale. Working dimensions 700mm
wide x 900mm high x 1,000mm deep (27" x 35" x 40"). Foot Print: 6,000mmL x
3,000mmW x 6,000mm H. Load Weight: <500kg. Temperature: 545deg C +/- 5deg C.
Power: 76kW Voltage: 240 / 415 V Phase: 3phase Process Gases: Nil, no atmosphere
control required Water Quench: 4,500 litre Agitator: 1kW Heater: 5kW Pump:
3,500rpm Mechanical Drive 1kW. Asking Price: $45,000US. Vendor will dismantle
and load into a container.
Item #T161
Despatch Oven. Model PWB2-63-1E. Line voltage 480V, 3 phase,
60Hz Electric control voltage 120V, 1 phase, 60Hz Heater 28.9 Amps, Motor
1.7 Amps, Total Motor 2.5 Amps. Maximum Temperature: 350°F. Overall
dimensions: 76"W x 42"D x 84"H. Working Dimensions: 48"W X 36"D X 61.5"H.
Type of control: Partlow MIC-6000 Honeywell DR-4200 Chart Recorder.
Excellent Condition. Asking Price: $8,500US
New Price: $6,500US
Item #T160
Despatch V-34 Standard 500’F MOT batch oven.
E&G. 36”W x 36”D x 36”H
inside dims. 3 adjustable shelves, round chart recorder/controller, high
limit. Refurbished, 90 day warranty. Asking Price: $4150.00US F.O.B.
Item #T159
Despatch V-34 Standard 500’F MOT batch oven.
E&G. 36”W x 36”D x
36”H inside dims. 3 adjustable shelves, indicating controller, high limit,
motorized exhaust. Refurbished, 90 day warranty. Asking Price: $4150.00US
F.O.B.
Item #T149
CEC Type Box Draw Furnace.
Gas Fired. Size I.D.: 24" wide X 36" long X 24" high. Maximum temp.: 1000°F.
Controls: Honeywell digital Temperature Control, Honeywell Digital
Overtemperature Control And Honeywell Dr4200 Round Chart Recorder. General:
Air Operated Vertical Lift Front Door. Gas Heated, The Interior Is Lined
With Light Weight Refractory, (2) 30" Long Roller Rails And A Belt Driven
Circulating Fan In The Roof. Outside dimensions are 9’ High x 7’ long x 6’
wide. (These take into account all piping and the control cabinet which is
on the side of the unit). F.O.B.: Ohio. Asking Price: $10,000US
Item #T148
Pacific Scientific Temper.
Model PKMD-50, 23" wide X 36" long x 18"
high, Gas fired. 1972 Vintage. 1250 F operating temperature. Asking Price
$6,000US.
Item #T129
Lindberg Box Temper.
Estimated to be almost 20 years old but
surprisingly enough don't think it was ever used and the internals certainly
look brand new. Working dimensions of approximately 12" X 12" X 18" high.
Operating temperature of 1400°F. Recirculating fan. Asking Price: $5,000. Immaculate condition.
|
